95199 POLY DISPENSING NOZZLE
Keywords: AROCOR ARO 95199 THE ARO CORPORATION 95199 POLY DISPENSING NOZZLE
Category: [0] => SUPPLIER DIRECTORY => THE ARO CORPORATION => ARO PNEUMATICS SECTION 75
Specialty Pumps - Drum Pump Dimensional Data
Pro-Series Pumps
1:1 Ratio Drum Pump Dimensional Data
SPECIALTY PUMPS
Model Number: A B C D
DAB05-AXXX-X-X 9-31/32" (253 mm) 8-5/32" (207 mm) 51-5/32" (1299 mm) 9-19/32" (243 mm)
DAB05-PXXX-X-X 12-1/32" (306 mm) 8-3/32" (206 mm) 50-5/32" (1274 mm) --
DAB05-SXXX-X-X 7-3/4" (197 mm) 8-3/32" (206 mm) 49-25/32" (1264 mm) --
For additional information contact technical support at (800)495-0276
Accessories
Air Line Connection Kit* | Kit No. 66073-1
Kit includes Piggyback Filter/Regulator with gauge, pipe nipple and a 5-foot section of air hose.
Service Repair Kits | Kit No. 637428 (air section)
Kit No. 637427-XX (fluid section)
Kit No. 104255 (for repair of P29122-600 piggyback filter/regulator)
Kit No. 637334 (for repair of 95199 dispensing nozzle)
Kit No. 637335 (for repair of 95183 oil spigot)
*Please note pumps are not included with these kits.
35
Drum Pumps
Specialty Pumps
For applications where half inch diaphragm pumps are used to draw fluid from 55-gallon drums.
55-Gallon Drum Bung Adapter Kits
Easily mounts pump in bung opening of drum. Permits easy change-over of pump from empty containers.
Kit contains Baseplate, Bung Adapter, Bung Seal, Siphon Tube, Weather Seal and Stainless Steel Hardware
Base Bung Tube Weather
Model Material Adapter Material Seal
67231 Polypropylene Polypropylene Polypropylene UHMW-PE
67231-6 Aluminum Aluminum Stainless Steel Viton
67231-7 Stainless Steel Stainless Steel Stainless Steel Viton
Foot Valves
Attaches to bottom of siphon tube. Allows pump to remain primed during drum changeover.
Recommended when dispensing nozzle is used.
Foot Valve contains Housing, Ball Check and O-Ring.
Housing Ball
Model Material Check O-Ring Used with
637336 Polypropylene Viton Viton 67231 Bung Adapter Kit
637337 Stainless Steel Viton Viton 67231-6 or 673231-7 Bung Adapter Kits
Bulk Tank Adapter Kits
For applications where pump will be mounted on a bulk tank.
Kit comes complete with necessary hardware and acts like a bulk head fitting.
SPECIALTY PUMPS
Customer must supply siphon tube to pump.
Kit contains Baseplate, Bung or Tank Adapter, Seal and Stainless Steel Hardware.
Base Bung
Model Material Adapter Seal
67234 Polypropylene Polypropylene Viton O-Ring Seal
67234-7 Stainless Steel Stainless Steel Viton O-Ring Seal
Hoses
Hose assemblies feature 1/2" ID hose supplied in 10-foot lengths
Hose Pump Inlet Fitting / Used with Nozzle
Model Material Used with Outlet Fitting (sold separately)
621514-10 EPDM Polypropylene Cam Fitting / 1" NPTM 95199 Dispensing Nozzle
621515-10 EPDM Polypropylene Cam Fitting / Bare N/A
621516-10 Nitrile Polypropylene Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621517-10 Nitrile Polypropylene Cam Fitting / Bare N/A
621518-10 Nitrile Aluminum Cam Fitting / Bare N/A
621519-10 Vinyl Polypropylene Cam Fitting / Bare N/A
621520-10 Nitrile Aluminum Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621523-10 Nitrile Polypropylene Cam Fitting / Non-Drip Nozzle N/A
621524-10 Nitrile Aluminum Cam Fitting / Non-Drip Nozzle N/A
622514-10 Nylon Polypropylene 1/2" NPTM inlet and outlet (316 Stainless fittings)
Fluid Dispense Equipment
Model Description Used with
95199 Composite Nozzle Features tough composite (polypropylene) construction for caustic service.
Works like gasoline nozzle. Requires 95200 Swivel
95200 Swivel Polypropylene swivel attaches between hose and 95199 dispensing nozzle. Allows operator to rotate
nozzle freely. 1" NPTM x 1" NPTF threads
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port. Provides even fluid dispensing.
Requires 77617-Z fitting. For Aluminum pumps in oil service.
77617 Oil Tapper Fitting Used to attach 95183 Oil Tapper to 1/2" Aluminum Pump. Plated carbon steel.
1/2 NPTF x 3/8" NPTF threads.
635129 Dispensing Bibb Radiator type bibb has 1/4" fluid inlet and non-drip tip. For water or oil service.
Zinc die casting with brass and nitrile seals. 1/4" NPTF inlet threads
Pump Outlet Adapter
Required to connect pump to hose assembly with Cam Fitting
Model Description Pump Used with Inlet / Outlet Threads:
95189 Composite Fitting Polypropylene 1/2" NPTM / Male Cam Fitting
95190 Aluminum Fitting Aluminum 1/2" NPTM / Male Cam Fitting
39
Drum Pumps
Specialty Pumps
For applications where half inch diaphragm pumps are used to draw fluid from 55-gallon drums.
55-Gallon Drum Bung Adapter Kits
Easily mounts pump in bung opening of drum. Permits easy change-over of pump from empty containers.
Kit contains Baseplate, Bung Adapter, Bung Seal, Siphon Tube, Weather Seal and Stainless Steel Hardware
Base Bung Tube Weather
Model Material Adapter Material Seal
67231 Polypropylene Polypropylene Polypropylene UHMW-PE
67231-6 Aluminum Aluminum Stainless Steel Viton
67231-7 Stainless Steel Stainless Steel Stainless Steel Viton
Foot Valves
Attaches to bottom of siphon tube. Allows pump to remain primed during drum changeover.
Recommended when dispensing nozzle is used.
Foot Valve contains Housing, Ball Check and O-Ring.
Housing Ball
Model Material Check O-Ring Used with
637336 Polypropylene Viton Viton 67231 Bung Adapter Kit
637337 Stainless Steel Viton Viton 67231-6 or 673231-7 Bung Adapter Kits
Bulk Tank Adapter Kits
For applications where pump will be mounted on a bulk tank.
Kit comes complete with necessary hardware and acts like a bulk head fitting.
SPECIALTY PUMPS
Customer must supply siphon tube to pump.
Kit contains Baseplate, Bung or Tank Adapter, Seal and Stainless Steel Hardware.
Base Bung
Model Material Adapter Seal
67234 Polypropylene Polypropylene Viton O-Ring Seal
67234-7 Stainless Steel Stainless Steel Viton O-Ring Seal
Hoses
Hose assemblies feature 1/2" ID hose supplied in 10-foot lengths
Hose Pump Inlet Fitting / Used with Nozzle
Model Material Used with Outlet Fitting (sold separately)
621514-10 EPDM Polypropylene Cam Fitting / 1" NPTM 95199 Dispensing Nozzle
621515-10 EPDM Polypropylene Cam Fitting / Bare N/A
621516-10 Nitrile Polypropylene Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621517-10 Nitrile Polypropylene Cam Fitting / Bare N/A
621518-10 Nitrile Aluminum Cam Fitting / Bare N/A
621519-10 Vinyl Polypropylene Cam Fitting / Bare N/A
621520-10 Nitrile Aluminum Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621523-10 Nitrile Polypropylene Cam Fitting / Non-Drip Nozzle N/A
621524-10 Nitrile Aluminum Cam Fitting / Non-Drip Nozzle N/A
622514-10 Nylon Polypropylene 1/2" NPTM inlet and outlet (316 Stainless fittings)
Fluid Dispense Equipment
Model Description Used with
95199 Composite Nozzle Features tough composite (polypropylene) construction for caustic service.
Works like gasoline nozzle. Requires 95200 Swivel
95200 Swivel Polypropylene swivel attaches between hose and 95199 dispensing nozzle. Allows operator to rotate
nozzle freely. 1" NPTM x 1" NPTF threads
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port. Provides even fluid dispensing.
Requires 77617-Z fitting. For Aluminum pumps in oil service.
77617 Oil Tapper Fitting Used to attach 95183 Oil Tapper to 1/2" Aluminum Pump. Plated carbon steel.
1/2 NPTF x 3/8" NPTF threads.
635129 Dispensing Bibb Radiator type bibb has 1/4" fluid inlet and non-drip tip. For water or oil service.
Zinc die casting with brass and nitrile seals. 1/4" NPTF inlet threads
Pump Outlet Adapter
Required to connect pump to hose assembly with Cam Fitting
Model Description Pump Used with Inlet / Outlet Threads:
95189 Composite Fitting Polypropylene 1/2" NPTM / Male Cam Fitting
95190 Aluminum Fitting Aluminum 1/2" NPTM / Male Cam Fitting
39
Drum Pumps
Specialty Pumps
For applications where half inch diaphragm pumps are used to draw fluid from 55-gallon drums.
55-Gallon Drum Bung Adapter Kits
Easily mounts pump in bung opening of drum. Permits easy change-over of pump from empty containers.
Kit contains Baseplate, Bung Adapter, Bung Seal, Siphon Tube, Weather Seal and Stainless Steel Hardware
Base Bung Tube Weather
Model Material Adapter Material Seal
67231 Polypropylene Polypropylene Polypropylene UHMW-PE
67231-6 Aluminum Aluminum Stainless Steel Viton
67231-7 Stainless Steel Stainless Steel Stainless Steel Viton
Foot Valves
Attaches to bottom of siphon tube. Allows pump to remain primed during drum changeover.
Recommended when dispensing nozzle is used.
Foot Valve contains Housing, Ball Check and O-Ring.
Housing Ball
Model Material Check O-Ring Used with
637336 Polypropylene Viton Viton 67231 Bung Adapter Kit
637337 Stainless Steel Viton Viton 67231-6 or 673231-7 Bung Adapter Kits
Bulk Tank Adapter Kits
For applications where pump will be mounted on a bulk tank.
Kit comes complete with necessary hardware and acts like a bulk head fitting.
SPECIALTY PUMPS
Customer must supply siphon tube to pump.
Kit contains Baseplate, Bung or Tank Adapter, Seal and Stainless Steel Hardware.
Base Bung
Model Material Adapter Seal
67234 Polypropylene Polypropylene Viton O-Ring Seal
67234-7 Stainless Steel Stainless Steel Viton O-Ring Seal
Hoses
Hose assemblies feature 1/2" ID hose supplied in 10-foot lengths
Hose Pump Inlet Fitting / Used with Nozzle
Model Material Used with Outlet Fitting (sold separately)
621514-10 EPDM Polypropylene Cam Fitting / 1" NPTM 95199 Dispensing Nozzle
621515-10 EPDM Polypropylene Cam Fitting / Bare N/A
621516-10 Nitrile Polypropylene Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621517-10 Nitrile Polypropylene Cam Fitting / Bare N/A
621518-10 Nitrile Aluminum Cam Fitting / Bare N/A
621519-10 Vinyl Polypropylene Cam Fitting / Bare N/A
621520-10 Nitrile Aluminum Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621523-10 Nitrile Polypropylene Cam Fitting / Non-Drip Nozzle N/A
621524-10 Nitrile Aluminum Cam Fitting / Non-Drip Nozzle N/A
622514-10 Nylon Polypropylene 1/2" NPTM inlet and outlet (316 Stainless fittings)
Fluid Dispense Equipment
Model Description Used with
95199 Composite Nozzle Features tough composite (polypropylene) construction for caustic service.
Works like gasoline nozzle. Requires 95200 Swivel
95200 Swivel Polypropylene swivel attaches between hose and 95199 dispensing nozzle. Allows operator to rotate
nozzle freely. 1" NPTM x 1" NPTF threads
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port. Provides even fluid dispensing.
Requires 77617-Z fitting. For Aluminum pumps in oil service.
77617 Oil Tapper Fitting Used to attach 95183 Oil Tapper to 1/2" Aluminum Pump. Plated carbon steel.
1/2 NPTF x 3/8" NPTF threads.
635129 Dispensing Bibb Radiator type bibb has 1/4" fluid inlet and non-drip tip. For water or oil service.
Zinc die casting with brass and nitrile seals. 1/4" NPTF inlet threads
Pump Outlet Adapter
Required to connect pump to hose assembly with Cam Fitting
Model Description Pump Used with Inlet / Outlet Threads:
95189 Composite Fitting Polypropylene 1/2" NPTM / Male Cam Fitting
95190 Aluminum Fitting Aluminum 1/2" NPTM / Male Cam Fitting
39
IRPS0259_Lubrication_catalog3.qxd:Catalog 2/21/08 10:58 AM Page 23
23
Diaphragm Pump Accessories
Hose
1/2 (12.7 mm) ID hose comes in 10' (3.0 m) lengths.
Dispensing
For Fittings nozzle used with
Model Material use with end / end (order separately)
621517-10 Nitrile Polypropylene Cam / bare N/A
621516-10 Nitrile Polypropylene Cam / brass 635129
1/4"-18 (6.3 mm) NPT male
621523-10 Nitrile Polypropylene Cam / non-drip N/A
nozzle
621514-10, 95200, 95199
621515-10 EPDM Polypropylene Cam / bare N/A Hose, swivel, and
621519-10 Vinyl Polypropylene Cam / bare N/A dispensing nozzle
621514-10 EPDM Polypropylene Cam / 1 (25.4) NPT 95199
622514-10 Nylon Polypropylene 1/2 (12.7 mm) NPT /
1/2 (12.7 mm) NPT 316 stainless steel 635129
621518-10 Nitrile Aluminum Cam / bare N/A
621520-10 Nitrile Aluminum Cam / brass 635129 621516-10
1/4"-18 (6.3 mm) NPTF
621524-10 Nitrile Aluminum Cam / non-drip nozzle N/A
Note: Hose requires 95189 to adapt to 1/2 port.
Hose and dispensing bibb
Fluid Dispensing Nozzles
Model Description
95199 Composite Nozzle High-flow nozzle works like gasoline nozzle; features tough composite
(polypropylene) construction for caustic service
95200 Swivel 1 (25.4 mm) (M) X 1 (25.4) NPT (F) Polypropylene hose swivel attaches between
hose and dispensing nozzle and allows operator to rotate freely; use with 95199
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port and provides
even flow dispensing; aluminum construction for oil service 621523-10
77617 Oil Tapper Fitting Plated carbon steel 1/2"-14 (12.7 mm) NPTF x 3/8"-18 (9.5 mm) NPTF -1; used Hose and non-drip nozzle
to attach 95183 oil tapper to 1/2 aluminum pump
635129 Bibb with Trigger 1/4 (6.3 mm) NPT(F) inlet, zinc die casting with brass, and nitrile seals for water
or oil service; radiator-type bibb has 1/4 (6.3 mm) fluid inlet and non-drip tip
Foot Valves
Recommended for use with dispensing nozzle. Assembly includes housing, ball check, and O-ring. 637336
Model Description Foot valve
637336 Polypropylene with Viton O-ring and ball. Use with 67231.
637337 Stainless steel with Viton O-ring and ball. Use with 67231-6 or 67231-7.
fluids.ingersollrand.com
(800) 495-0276
ARO Ingersoll-Rand and Replacement Parts
