635129 BIBB
Keywords: AROCOR ARO 635129 THE ARO CORPORATION 635129 BIBB
Category: [0] => SUPPLIER DIRECTORY => THE ARO CORPORATION => ARO PNEUMATICS SECTION 103
Drum Pumps
Specialty Pumps
For applications where half inch diaphragm pumps are used to draw fluid from 55-gallon drums.
55-Gallon Drum Bung Adapter Kits
Easily mounts pump in bung opening of drum. Permits easy change-over of pump from empty containers.
Kit contains Baseplate, Bung Adapter, Bung Seal, Siphon Tube, Weather Seal and Stainless Steel Hardware
Base Bung Tube Weather
Model Material Adapter Material Seal
67231 Polypropylene Polypropylene Polypropylene UHMW-PE
67231-6 Aluminum Aluminum Stainless Steel Viton
67231-7 Stainless Steel Stainless Steel Stainless Steel Viton
Foot Valves
Attaches to bottom of siphon tube. Allows pump to remain primed during drum changeover.
Recommended when dispensing nozzle is used.
Foot Valve contains Housing, Ball Check and O-Ring.
Housing Ball
Model Material Check O-Ring Used with
637336 Polypropylene Viton Viton 67231 Bung Adapter Kit
637337 Stainless Steel Viton Viton 67231-6 or 673231-7 Bung Adapter Kits
Bulk Tank Adapter Kits
For applications where pump will be mounted on a bulk tank.
Kit comes complete with necessary hardware and acts like a bulk head fitting.
SPECIALTY PUMPS
Customer must supply siphon tube to pump.
Kit contains Baseplate, Bung or Tank Adapter, Seal and Stainless Steel Hardware.
Base Bung
Model Material Adapter Seal
67234 Polypropylene Polypropylene Viton O-Ring Seal
67234-7 Stainless Steel Stainless Steel Viton O-Ring Seal
Hoses
Hose assemblies feature 1/2" ID hose supplied in 10-foot lengths
Hose Pump Inlet Fitting / Used with Nozzle
Model Material Used with Outlet Fitting (sold separately)
621514-10 EPDM Polypropylene Cam Fitting / 1" NPTM 95199 Dispensing Nozzle
621515-10 EPDM Polypropylene Cam Fitting / Bare N/A
621516-10 Nitrile Polypropylene Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621517-10 Nitrile Polypropylene Cam Fitting / Bare N/A
621518-10 Nitrile Aluminum Cam Fitting / Bare N/A
621519-10 Vinyl Polypropylene Cam Fitting / Bare N/A
621520-10 Nitrile Aluminum Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621523-10 Nitrile Polypropylene Cam Fitting / Non-Drip Nozzle N/A
621524-10 Nitrile Aluminum Cam Fitting / Non-Drip Nozzle N/A
622514-10 Nylon Polypropylene 1/2" NPTM inlet and outlet (316 Stainless fittings)
Fluid Dispense Equipment
Model Description Used with
95199 Composite Nozzle Features tough composite (polypropylene) construction for caustic service.
Works like gasoline nozzle. Requires 95200 Swivel
95200 Swivel Polypropylene swivel attaches between hose and 95199 dispensing nozzle. Allows operator to rotate
nozzle freely. 1" NPTM x 1" NPTF threads
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port. Provides even fluid dispensing.
Requires 77617-Z fitting. For Aluminum pumps in oil service.
77617 Oil Tapper Fitting Used to attach 95183 Oil Tapper to 1/2" Aluminum Pump. Plated carbon steel.
1/2 NPTF x 3/8" NPTF threads.
635129 Dispensing Bibb Radiator type bibb has 1/4" fluid inlet and non-drip tip. For water or oil service.
Zinc die casting with brass and nitrile seals. 1/4" NPTF inlet threads
Pump Outlet Adapter
Required to connect pump to hose assembly with Cam Fitting
Model Description Pump Used with Inlet / Outlet Threads:
95189 Composite Fitting Polypropylene 1/2" NPTM / Male Cam Fitting
95190 Aluminum Fitting Aluminum 1/2" NPTM / Male Cam Fitting
39
Drum Pumps
Specialty Pumps
For applications where half inch diaphragm pumps are used to draw fluid from 55-gallon drums.
55-Gallon Drum Bung Adapter Kits
Easily mounts pump in bung opening of drum. Permits easy change-over of pump from empty containers.
Kit contains Baseplate, Bung Adapter, Bung Seal, Siphon Tube, Weather Seal and Stainless Steel Hardware
Base Bung Tube Weather
Model Material Adapter Material Seal
67231 Polypropylene Polypropylene Polypropylene UHMW-PE
67231-6 Aluminum Aluminum Stainless Steel Viton
67231-7 Stainless Steel Stainless Steel Stainless Steel Viton
Foot Valves
Attaches to bottom of siphon tube. Allows pump to remain primed during drum changeover.
Recommended when dispensing nozzle is used.
Foot Valve contains Housing, Ball Check and O-Ring.
Housing Ball
Model Material Check O-Ring Used with
637336 Polypropylene Viton Viton 67231 Bung Adapter Kit
637337 Stainless Steel Viton Viton 67231-6 or 673231-7 Bung Adapter Kits
Bulk Tank Adapter Kits
For applications where pump will be mounted on a bulk tank.
Kit comes complete with necessary hardware and acts like a bulk head fitting.
SPECIALTY PUMPS
Customer must supply siphon tube to pump.
Kit contains Baseplate, Bung or Tank Adapter, Seal and Stainless Steel Hardware.
Base Bung
Model Material Adapter Seal
67234 Polypropylene Polypropylene Viton O-Ring Seal
67234-7 Stainless Steel Stainless Steel Viton O-Ring Seal
Hoses
Hose assemblies feature 1/2" ID hose supplied in 10-foot lengths
Hose Pump Inlet Fitting / Used with Nozzle
Model Material Used with Outlet Fitting (sold separately)
621514-10 EPDM Polypropylene Cam Fitting / 1" NPTM 95199 Dispensing Nozzle
621515-10 EPDM Polypropylene Cam Fitting / Bare N/A
621516-10 Nitrile Polypropylene Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621517-10 Nitrile Polypropylene Cam Fitting / Bare N/A
621518-10 Nitrile Aluminum Cam Fitting / Bare N/A
621519-10 Vinyl Polypropylene Cam Fitting / Bare N/A
621520-10 Nitrile Aluminum Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621523-10 Nitrile Polypropylene Cam Fitting / Non-Drip Nozzle N/A
621524-10 Nitrile Aluminum Cam Fitting / Non-Drip Nozzle N/A
622514-10 Nylon Polypropylene 1/2" NPTM inlet and outlet (316 Stainless fittings)
Fluid Dispense Equipment
Model Description Used with
95199 Composite Nozzle Features tough composite (polypropylene) construction for caustic service.
Works like gasoline nozzle. Requires 95200 Swivel
95200 Swivel Polypropylene swivel attaches between hose and 95199 dispensing nozzle. Allows operator to rotate
nozzle freely. 1" NPTM x 1" NPTF threads
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port. Provides even fluid dispensing.
Requires 77617-Z fitting. For Aluminum pumps in oil service.
77617 Oil Tapper Fitting Used to attach 95183 Oil Tapper to 1/2" Aluminum Pump. Plated carbon steel.
1/2 NPTF x 3/8" NPTF threads.
635129 Dispensing Bibb Radiator type bibb has 1/4" fluid inlet and non-drip tip. For water or oil service.
Zinc die casting with brass and nitrile seals. 1/4" NPTF inlet threads
Pump Outlet Adapter
Required to connect pump to hose assembly with Cam Fitting
Model Description Pump Used with Inlet / Outlet Threads:
95189 Composite Fitting Polypropylene 1/2" NPTM / Male Cam Fitting
95190 Aluminum Fitting Aluminum 1/2" NPTM / Male Cam Fitting
39
Drum Pumps
Specialty Pumps
For applications where half inch diaphragm pumps are used to draw fluid from 55-gallon drums.
55-Gallon Drum Bung Adapter Kits
Easily mounts pump in bung opening of drum. Permits easy change-over of pump from empty containers.
Kit contains Baseplate, Bung Adapter, Bung Seal, Siphon Tube, Weather Seal and Stainless Steel Hardware
Base Bung Tube Weather
Model Material Adapter Material Seal
67231 Polypropylene Polypropylene Polypropylene UHMW-PE
67231-6 Aluminum Aluminum Stainless Steel Viton
67231-7 Stainless Steel Stainless Steel Stainless Steel Viton
Foot Valves
Attaches to bottom of siphon tube. Allows pump to remain primed during drum changeover.
Recommended when dispensing nozzle is used.
Foot Valve contains Housing, Ball Check and O-Ring.
Housing Ball
Model Material Check O-Ring Used with
637336 Polypropylene Viton Viton 67231 Bung Adapter Kit
637337 Stainless Steel Viton Viton 67231-6 or 673231-7 Bung Adapter Kits
Bulk Tank Adapter Kits
For applications where pump will be mounted on a bulk tank.
Kit comes complete with necessary hardware and acts like a bulk head fitting.
SPECIALTY PUMPS
Customer must supply siphon tube to pump.
Kit contains Baseplate, Bung or Tank Adapter, Seal and Stainless Steel Hardware.
Base Bung
Model Material Adapter Seal
67234 Polypropylene Polypropylene Viton O-Ring Seal
67234-7 Stainless Steel Stainless Steel Viton O-Ring Seal
Hoses
Hose assemblies feature 1/2" ID hose supplied in 10-foot lengths
Hose Pump Inlet Fitting / Used with Nozzle
Model Material Used with Outlet Fitting (sold separately)
621514-10 EPDM Polypropylene Cam Fitting / 1" NPTM 95199 Dispensing Nozzle
621515-10 EPDM Polypropylene Cam Fitting / Bare N/A
621516-10 Nitrile Polypropylene Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621517-10 Nitrile Polypropylene Cam Fitting / Bare N/A
621518-10 Nitrile Aluminum Cam Fitting / Bare N/A
621519-10 Vinyl Polypropylene Cam Fitting / Bare N/A
621520-10 Nitrile Aluminum Cam Fitting / 1/4 NPTM (Brass) 635129 Dispensing Bibb
621523-10 Nitrile Polypropylene Cam Fitting / Non-Drip Nozzle N/A
621524-10 Nitrile Aluminum Cam Fitting / Non-Drip Nozzle N/A
622514-10 Nylon Polypropylene 1/2" NPTM inlet and outlet (316 Stainless fittings)
Fluid Dispense Equipment
Model Description Used with
95199 Composite Nozzle Features tough composite (polypropylene) construction for caustic service.
Works like gasoline nozzle. Requires 95200 Swivel
95200 Swivel Polypropylene swivel attaches between hose and 95199 dispensing nozzle. Allows operator to rotate
nozzle freely. 1" NPTM x 1" NPTF threads
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port. Provides even fluid dispensing.
Requires 77617-Z fitting. For Aluminum pumps in oil service.
77617 Oil Tapper Fitting Used to attach 95183 Oil Tapper to 1/2" Aluminum Pump. Plated carbon steel.
1/2 NPTF x 3/8" NPTF threads.
635129 Dispensing Bibb Radiator type bibb has 1/4" fluid inlet and non-drip tip. For water or oil service.
Zinc die casting with brass and nitrile seals. 1/4" NPTF inlet threads
Pump Outlet Adapter
Required to connect pump to hose assembly with Cam Fitting
Model Description Pump Used with Inlet / Outlet Threads:
95189 Composite Fitting Polypropylene 1/2" NPTM / Male Cam Fitting
95190 Aluminum Fitting Aluminum 1/2" NPTM / Male Cam Fitting
39
IRPS0259_Lubrication_catalog3.qxd:Catalog 2/21/08 10:58 AM Page 23
23
Diaphragm Pump Accessories
Hose
1/2 (12.7 mm) ID hose comes in 10' (3.0 m) lengths.
Dispensing
For Fittings nozzle used with
Model Material use with end / end (order separately)
621517-10 Nitrile Polypropylene Cam / bare N/A
621516-10 Nitrile Polypropylene Cam / brass 635129
1/4"-18 (6.3 mm) NPT male
621523-10 Nitrile Polypropylene Cam / non-drip N/A
nozzle
621514-10, 95200, 95199
621515-10 EPDM Polypropylene Cam / bare N/A Hose, swivel, and
621519-10 Vinyl Polypropylene Cam / bare N/A dispensing nozzle
621514-10 EPDM Polypropylene Cam / 1 (25.4) NPT 95199
622514-10 Nylon Polypropylene 1/2 (12.7 mm) NPT /
1/2 (12.7 mm) NPT 316 stainless steel 635129
621518-10 Nitrile Aluminum Cam / bare N/A
621520-10 Nitrile Aluminum Cam / brass 635129 621516-10
1/4"-18 (6.3 mm) NPTF
621524-10 Nitrile Aluminum Cam / non-drip nozzle N/A
Note: Hose requires 95189 to adapt to 1/2 port.
Hose and dispensing bibb
Fluid Dispensing Nozzles
Model Description
95199 Composite Nozzle High-flow nozzle works like gasoline nozzle; features tough composite
(polypropylene) construction for caustic service
95200 Swivel 1 (25.4 mm) (M) X 1 (25.4) NPT (F) Polypropylene hose swivel attaches between
hose and dispensing nozzle and allows operator to rotate freely; use with 95199
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port and provides
even flow dispensing; aluminum construction for oil service 621523-10
77617 Oil Tapper Fitting Plated carbon steel 1/2"-14 (12.7 mm) NPTF x 3/8"-18 (9.5 mm) NPTF -1; used Hose and non-drip nozzle
to attach 95183 oil tapper to 1/2 aluminum pump
635129 Bibb with Trigger 1/4 (6.3 mm) NPT(F) inlet, zinc die casting with brass, and nitrile seals for water
or oil service; radiator-type bibb has 1/4 (6.3 mm) fluid inlet and non-drip tip
Foot Valves
Recommended for use with dispensing nozzle. Assembly includes housing, ball check, and O-ring. 637336
Model Description Foot valve
637336 Polypropylene with Viton O-ring and ball. Use with 67231.
637337 Stainless steel with Viton O-ring and ball. Use with 67231-6 or 67231-7.
fluids.ingersollrand.com
(800) 495-0276
IRPS0259_Lubrication_catalog3.qxd:Catalog 2/21/08 10:58 AM Page 23
23
Diaphragm Pump Accessories
Hose
1/2 (12.7 mm) ID hose comes in 10' (3.0 m) lengths.
Dispensing
For Fittings nozzle used with
Model Material use with end / end (order separately)
621517-10 Nitrile Polypropylene Cam / bare N/A
621516-10 Nitrile Polypropylene Cam / brass 635129
1/4"-18 (6.3 mm) NPT male
621523-10 Nitrile Polypropylene Cam / non-drip N/A
nozzle
621514-10, 95200, 95199
621515-10 EPDM Polypropylene Cam / bare N/A Hose, swivel, and
621519-10 Vinyl Polypropylene Cam / bare N/A dispensing nozzle
621514-10 EPDM Polypropylene Cam / 1 (25.4) NPT 95199
622514-10 Nylon Polypropylene 1/2 (12.7 mm) NPT /
1/2 (12.7 mm) NPT 316 stainless steel 635129
621518-10 Nitrile Aluminum Cam / bare N/A
621520-10 Nitrile Aluminum Cam / brass 635129 621516-10
1/4"-18 (6.3 mm) NPTF
621524-10 Nitrile Aluminum Cam / non-drip nozzle N/A
Note: Hose requires 95189 to adapt to 1/2 port.
Hose and dispensing bibb
Fluid Dispensing Nozzles
Model Description
95199 Composite Nozzle High-flow nozzle works like gasoline nozzle; features tough composite
(polypropylene) construction for caustic service
95200 Swivel 1 (25.4 mm) (M) X 1 (25.4) NPT (F) Polypropylene hose swivel attaches between
hose and dispensing nozzle and allows operator to rotate freely; use with 95199
95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port and provides
even flow dispensing; aluminum construction for oil service 621523-10
77617 Oil Tapper Fitting Plated carbon steel 1/2"-14 (12.7 mm) NPTF x 3/8"-18 (9.5 mm) NPTF -1; used Hose and non-drip nozzle
to attach 95183 oil tapper to 1/2 aluminum pump
635129 Bibb with Trigger 1/4 (6.3 mm) NPT(F) inlet, zinc die casting with brass, and nitrile seals for water
or oil service; radiator-type bibb has 1/4 (6.3 mm) fluid inlet and non-drip tip
Foot Valves
Recommended for use with dispensing nozzle. Assembly includes housing, ball check, and O-ring. 637336
Model Description Foot valve
637336 Polypropylene with Viton O-ring and ball. Use with 67231.
637337 Stainless steel with Viton O-ring and ball. Use with 67231-6 or 67231-7.
fluids.ingersollrand.com
(800) 495-0276
IRPS0259_Lubrication_catalog3.qxd:Catalog 2/21/08 10:58 AM Page 30
30
Control Handles
Non-metered Fluid Control Handles
Max working Fluid inlet
pressure NPT (F) Fluid
Model Description psi (bar) in (mm) outlet
635193
MOTOR OIL, GEAR OIL, TRANSMISSION FLUID
HIGH-VOLUME
635193 Has flexible rubber hose with non-drip nozzle; 600 (41) 3/4" (19.1) 629212
use with 1:1 and 3:1 pumps; Non-drip tip
635395-2 Has flexible rubber hose with non-drip nozzle; 900 (63) 3/4" (19.1) 629212
use with 5:1 and 9:1 pumps; non-drip tip 635399
STANDARD-VOLUME
635392 Has flexible rubber hose, built-in swivel and filter, 1,000 (69) 1/2" (12.7) 60164
and non-drip nozzle; non-drip tip
635392
635399 Has flexible rubber hose, built-in swivel, and 1,000 (69) 1/2" (12.7) 70790
right-angle non-drip nozzle; non-drip tip
WATER, ANTIFREEZE
635129 Radiator bibb 300 (21) 1/4" (6.3) Non-drip tip
Digital, Metered Fluid Control Handles
Our metered control handle features a patented oval gear wheel Lightweight Precise
design for precise and reliable measurement. Its digital LCD Fast reset Totalizes
readout operates on two standard alkaline batteries.
Max flow Meter / Max working Fluid inlet 635390-X
rate totalizing pressure NPT (F) Fluid
Model gpm (L) increments psi (bar) in (mm) outlet
METERED, RIGID NOZZLE MODELS
635390-11 4 (15) Pints / gallons 1,000 (69) 1/2" (12.7) Non-drip tip
635390-22 4 (15) Quarts / gallons 1,000 (69) 1/2" (12.7) Non-drip tip
635390-33 4 (15) Liters / liters 1,000 (69) 1/2" (12.7) Non-drip tip 635390-XX
NON-METERED, RIGID NOZZLE MODELS (HANDLE AND NOZZLE ONLY)
635391-11 4 (15) - 1,000 (69) 1/2" (12.7) Non-drip tip
METERED, FLEXIBLE NOZZLE MODELS
635390-1 4 (15) Pints / gallons 1,000 (69) 1/2" (12.7) Non-drip tip
635391-11
635390-2 4 (15) Quarts / gallons 1,000 (69) 1/2" (12.7) Non-drip tip
635390-3 4 (15) Liters / liters 1,000 (69) 1/2" (12.7) Non-drip tip
NON-METERED, FLEXIBLE NOZZLE MODELS (HANDLE AND NOZZLE ONLY)
635391-1 4 (15) - 1,000 (69) 1/2" (12.7) Non-drip tip
635391-1
IRPS0259_Lubrication_catalog3.qxd:Catalog 2/21/08 10:58 AM Page 32
32
Control Handle Accessories
High-pressure Grease Control Handles
Max working Fluid inlet Fluid
pressure NPT (F) outlet
Model Description psi (bar) in (mm) in (mm)
GREASE CONTROL HANDLES
636101 Dispenses lubrication at line pressure 7,50 3/8" (9.5) (F) 11/16" 16
for lubricating grease fittings; does not (517) (17.5) (M)
include nozzle or hydraulic coupler; or 1/8" (3.2)
for applications requiring high-flow NPT (F)
capacity; remove the 1/8" (3.2 mm)
(M) x 3/8" (9.5 mm) (M) adapter for
3/8" (9.5 mm) (F) porting
636111 Dispenses lubricant at line pressure for 7,500 1/8" (3.2) (M) Hydraulic
lubricating grease fittings; includes inlet (517) or 3/8" (9.5) (F) coupler
material filter and curved nozzle with
hydraulic coupler; remove the 1/8" 636111
(3.2 mm) (M) x 3/8" (9.5 mm) (M) 636101
adapter for 3/8" (9.5 mm) (F) porting
636103 High-pressure booster handle delivers 7,500 1/8" (3.2) (M) Hydraulic
line pressure for normal lubrication; (517) or 3/8" (9.5) (F) coupler
trigger booster feature delivers 10,000 psi
(689 bar) to loose tougher fittings; includes
curved nozzle with hydraulic coupler, inlet
material filter and manual pressure vent for
easy disconnection; do not use with
whip hose
WHIP HOSES FOR GREASE CONTROL HANDLES*
629742 Extra-long, wire braid (624201-02) 5,000 1/8" (3.2) (F) 636046
whip hose with hydraulic coupler and (345) hydraulic 636103
swivel; overall length of 29-1/2" (749 mm);
for use with coupler 636111 high-pressure
control handle; allows operator to access
hard-to-reach fittings 629742
*WARNING: Not for use with 636103 high-pressure booster handle.
Specialty Application Control Handle
Model Description
WATER, ANTIFREEZE, WINDSHIELD FLUID 635129
635129 Fluid dispensing nozzle 635129 bibb with trigger 1/4" (6.3 mm) NPT(F) inlet,
zinc die casting with brass, and nitrile seals for water or oil service; radiator-type
bibb has 1/4" (6.3 mm) fluid inlet and non-drip tip
IRPS0259_Lubrication_catalog3.qxd:Catalog 2/21/08 10:58 AM Page 38
38
640153
General Low level cutoff for 3" (76.2 mm) Thunder Series Installation
Accessories oil pump. For use with Thunder Series oil.
61118
Accessories
640058-2 Pressure relief valve kit. 65986-1
Dolly for 16-gal (60.6 L) keg. 95183 Siphon tube with 6' (1.8 m) hose for 55-gal (208.1
liter) drum with 2" (50.8 mm) bung. For use with
94421 Oil tapper 3/4" (19.1 mm) NPT inlet. Thunder Series and diaphragm pumps.
Drum cover for 77617
16-gal (60.6 L) keg. 61601
Oil tapper fitting (converts oil tapper to 1/2", Siphon tube with 6' (1.8 m) hose
640165 12.7 mm inlet). for 55-gal (208.1 liter) drum for
Follower plate for 3" (76.2 mm) Thunder Series 640164 wall-mounted pump. For use with
and 120-lb (54.4 kg) container. For use with Thunder Series pump.
Tie-down kit for 16-gal / 120-lb 61601
Thunder Series grease.
(60.6 L / 54.4 kg) containers. 66779
640015-1 Siphon tube for 55-gal (208.1
71027-1
Follower plate for 3" liter) drum. For use with Thunder
(76.2 mm) Thunder Tie-down kit for 55-gal / 400-lb Series and diaphragm pumps.
Series and 400-lb (208.1 L / 181.4 kg) containers.
(181.4 kg) container. 66779-1
For use with Thunder
Series grease. 640015-1 Dispensing Siphon tube for 55-gal (208.1
liter) drum. For use with Thunder
640095-1-B Accessories Series and diaphragm pumps.
66779-2
Follower plate for 2" (50.8 mm) Thunder Series 621516-10
and 35-lb (15.9 kg) container. For use with Siphon tube with 6' (1.8 m) hose
Thunder Series grease. 10' (3.0 m) hose for 275 Series container. For use
and dispensing with Thunder Series and
640095-2-B bibb for use with diaphragm pumps.
Follower plate for 3"(76.2 diaphragm pump.
mm) Thunder Series and 622701-6
635129 621516-10
35-lb (15.9 kg) container. 6' (1.8 m) siphon hose. For use with
For use with Thunder Dispensing bibb Thunder Series and diaphragm pumps.
Series grease. 640095-2-B for use with
diaphragm pump. 61113
67145-1 Wall-mount for stub pumps. For use with
621523-10
Bung adapter for 2" (50.8 mm) Thunder Series Thunder Series pump.
grease pump. For use with Thunder Series grease. 10' (3.0 m) hose
with no-drip 61412
67145-2 nozzle. For use Siphon tube for 1/2" (12.7 mm) diaphragm pump.
Bung adapter for 3" with diaphragm
pump. 76763
(76.2 mm) Thunder Series 625123-10
grease pump. For use with Wall-mount for 1/2" (12.7 mm) diaphragm pumps.
95189
Thunder Series grease. 66100
67145-X Poly cam coupler 1/2"
67145-3-B (12.7 mm) NPT (M) Wall-mount for 1" (25.4 mm) diaphragm pumps.
Bung adapter for 2" (50.8 95190
mm) Thunder Series oil
pump. For use with Aluminum cam coupler 1/2"
Thunder Series oil. 67145-X-B (12.7 mm) NPT (M)
67145-4-B
Bung adapter for 3" (76.2 mm) Thunder Series
oil pump. For use with Thunder Series oil.
